Due to COVID-19 we only have a limited supply of brand new above ground pool liners in stock and ready for pick up. Made in USA by Swimline Corp. in Long Island New York. Please read the description for each type of liner below to determine which is best for your application. Call if you have any questions or need assistance.
321 662 4728
Solid Blue Overlap – Swimline 20ga
All of our pool liners are made in the USA by Swimline Corp. New York. These liners are priced low and shown pricing is for pick up in Melbourne only.
- 18′ Round – $130 – 1 Available
- 21′ Round – $160 – 1 Available
- 24′ Round – $180 – 3 Available
- 27′ Round – $220 – 2 Available
- 12′ x 24′ Oval – $150 – 1 Available
- 15′ x 30′ Oval – $200 – 1 Available
Swimline Solid Blue Overlap vinyl pool liners. This standard gauge liner will fit most any 48″-52″ above ground pool that uses an overlap style pool liner. Made in the USA from 100% virgin vinyl. Protected from ultraviolet fading and chemical degradation. Best cold crack resistance in the industry. 15 year warranty.
Overlap above ground pool liners are easy to identify as they simply go up the inside of the pool wall and hang over on the outside, leaving several inches of excess vinyl visible. These liners are held in place with strips of plastic called liner coping strips. Overlap liners are the most affordable pool liner and can come plain or decorative and in various thicknesses. Overlap liners are made to fit 48″ 52″ or 54″ pool walls.
Note: Always replace cracked or old coping strips to ensure a tight secure fit.
Swimline Pool Liner Installation Instructions Size: (590.33 KB) Swimline Unibead Pool Liner Installation Instructions Size: (2.84 MB)
Swirl Bottom Overlap – Swimline 20ga
All of our pool liners are made in the USA by Swimline Corp. New York. These liners are priced low and shown pricing is for pick up in Melbourne only.
- 27′ Round – $240 – 2 Available
- 15′ x 26′ Oval – $230 – 3 Available
Swimline Swirl Bottom Overlap vinyl pool liners. This liner has blue sides with a swirl print on the floor only and this standard gauge liner will fit most any 48″-52″ above ground pool that uses an overlap style pool liner. Made in the USA from 100% virgin vinyl. Protected from ultraviolet fading and chemical degradation. Best cold crack resistance in the industry. 15 year warranty.
Overlap above ground pool liners are easy to identify as they simply go up the inside of the pool wall and hang over on the outside, leaving several inches of excess vinyl visible. These liners are held in place with strips of plastic called liner coping strips. Overlap liners are the most affordable pool liner and can come plain or decorative and in various thicknesses. Overlap liners are made to fit 48″ 52″ or 54″ pool walls.
Note: Always replace cracked or old coping strips to ensure a tight secure fit.
Swimline Pool Liner Installation Instructions Size: (590.33 KB) Swimline Unibead Pool Liner Installation Instructions Size: (2.84 MB)
Sunlight Overlap – Swimline 20ga
All of our pool liners are made in the USA by Swimline Corp. New York. These liners are priced low and shown pricing is for pick up in Melbourne only.
- 24′ Round – $220 – 2 Available
- 27′ Round – $280 – 2 Available
Swimline Sunlight Overlap vinyl pool liners. This liner has swirl print sides with a swirl print on the floor. The standard gauge liner will fit most any 48″-52″ above ground pool that uses an overlap style pool liner. Made in the USA from 100% virgin vinyl. Protected from ultraviolet fading and chemical degradation. Best cold crack resistance in the industry. 15 year warranty.
Overlap above ground pool liners are easy to identify as they simply go up the inside of the pool wall and hang over on the outside, leaving several inches of excess vinyl visible. These liners are held in place with strips of plastic called liner coping strips. Overlap liners are the most affordable pool liner and can come plain or decorative and in various thicknesses. Overlap liners are made to fit 48″ 52″ or 54″ pool walls.
Note: Always replace cracked or old coping strips to ensure a tight secure fit.
Swimline Pool Liner Installation Instructions Size: (590.33 KB) Swimline Unibead Pool Liner Installation Instructions Size: (2.84 MB)
Above Ground Pool Floor Pads – Armor Shield
Pool floor pad inventory is always changing. Be sure to ask if you don’t see your size. Prices are for pick up in Melbourne only.
- 12′ Round — $50 – Available
- 15′ Round — $65 – Available
- 18′ Round — $90 – Available
- 21′ Round – $125 – Available
- 24′ Round – $150 – Available
- 27′ Round – $185 – Out Of Stock
- 30′ Round – $230 – Out Of Stock
- 33′ Round – $250 – Out Of Stock
- 12′ x 24′ Oval — $90 – Available
- 15′ x 26′ Oval – $110 – Available
- 15′ x 30′ Oval – $130 – Available
- 18′ x 33′ Oval – $180 – Available
- 21′ x 43′ Oval – $250 – Out Of Stock
Armor Shield pool floor pad provides a protective layer between the vinyl swimming pool liner and the ground. This product will keep unwanted rodents, roots, rocks, sharp objects and even glass from puncturing your new pool liner. This Polypropylene Geo-textile material is extremely tough and nearly indestructible. Better yet it’s breathable, does not trap moisture and will not contribute to pool corrosion. Pre-cut to size and shape, no cutting or taping needed. Ready to use right out of the box. Great added insurance for your pool liner investment. Combine with nutgrass killer for the ultimate in pool liner protection. This product does not stop nutgrass.
Installation – Once you have added your pool cove and accessories and are happy with the final grade of the pool floor, you are ready to add the Armor Shield. Simply remove from the box and spread out on the pool floor. Be sure to center it up in the pool and no need to trim it. I recommend spraying the floor pad down with water to prevent shifting while installing the pool liner. Once watered down install the pool liner directly on top of the Armor Shield pool floor pad.
Above Ground Pool Cove Kits
Cove kits include enough pieces for the size pool listed. Please ask if you don’t see your size.
- 12′ Round — $60 – Available
- 15′ Round — $70 – Available
- 18′ Round — $90 – Available
- 21′ Round — $90 – Available
- 24′ Round – $100 – Available
- 27′ Round – $120 – Available
- 30′ Round – $130 – Available
- 33′ Round – $150 – Available
- 12′ x 24′ Oval — $90 – Available
- 15′ x 26′ Oval – $100 – Available
- 15′ x 30′ Oval – $110 – Available
- 18′ x 33′ Oval – $130 – Available
- 21′ x 43′ Oval – $150 – Available
Every traditional above ground pool needs a cove to protect the liner from the base framework of the pool as well as help prevent excessive stretching of the pool liner. And these pre-formed pool cove kits make for a uniform and professional finish to your above ground pool project. These preformed flexible wedge shaped foam pieces measure 4″H x 3″W x 48″L and made from chemically neutral closed cell Ethafoam. They’re placed around the entire inside perimeter of the pool at the base of the wall, and held in place by a tacky adhesive backing. The adhesive is covered by a clear, releasable film that is peeled away when the cove is being installed. The adhesive backing attaches the cove section to the pool wall and holds it firmly in place.
Pool Wall Foam
Pool wall foam kits include enough foam and adhesive for the pool size selected.
- 12′ Round — $70 -– Available
- 15′ Round — $70 -– Available
- 18′ Round — $85 -– Available
- 21′ Round – $120 – Available
- 24′ Round – $120 – Available
- 27′ Round – $135 – Available
- 30′ Round – $135 – Available
- 33′ Round – $155 – Available
- 12′ x 18′ Oval — $70 – Available
- 12′ x 24′ Oval – $120 – Available
- 15′ x 26′ Oval – $120 – Available
- 15′ x 30′ Oval – $120 – Available
- 16′ x 32′ Oval – $135 – Available
- 18′ x 33′ Oval – $135 – Available
- 18′ x 38′ Oval – $155 – Available
- 21′ x 43′ Oval – $170 – Available
Pool wall foam kits for above ground pools are designed to keep pool water warmer by adding insulation to your pool wall. At the same time it protects your new swimming pool liner from punctures. This is especially effective on older swimming pool walls that may now have a rough texture. Adding the pool wall foam will help smooth out the roughness and keep the liner from coming in contact with coarse wall surface.
This roll of pool wall foam is held in place with Foam Bond. This is a extremely sticky adhesive and highly recommended for use on wall foam over other brand spray adhesives. This spray glue must be applied to a clean dry pool wall to hold foam firmly in place. Pool wall foam works with pool walls up to 54″ tall. Foam color may vary by supplier.